+420 267 313 996
info@ndtone.com
Description
Probe for measurement of metal surface temperature, air temperature, relative air humidity, temperature of dew point and calculation of the difference between metal surface temperature and temperature of dew point (inspection of conditions during painting of metal products).
The ΔT parameter represents the difference between the metal surface temperature and the dew point temperature. If ΔT is less than 3–4 °C, painting works is not permitted, as condensation will form on the surface.
Data shown on device display when THDC probe is connected
Features
- Measurement of all relevant environmental and surface parameters for painting works.
- Automatic calculation of the ΔT parameter.
- Convenient probe design enabling temperature measurement on metal surfaces, including hard-to-reach areas.
- High measurement speed.
Basic technical characteristics
| Technical data | THDC | |
|---|---|---|
| measurement range: | air temperature: from -10 to +40 °С | |
| metal surface temperature: from -40 to +85 °С | ||
| relative air humidity: from 5 to 90 % | ||
| measurement accuracy: | air temperature: ≤ ±3 °C | |
| relative air humidity: ≤ ±3 % | ||
| size | THD probe: Ø16,5×32 mm | |
| TC probe: Ø18×86 mm |
Related products
-
NF0
NF0 is a probe designed for measuring the thickness of dielectric (anode oxide, paint, lacquer, powder, etc.) coatings on current-conducting non-ferromagnetic parts.
-
R
The probe is designed for measuring groove depth and assessing surface roughness after sandblasting and shot blasting prior to painting works.
-
F1
F1 is a probe designed for measuring the thickness of galvanic (zinc, chrome, cadmium, etc.) and dielectric (lacquer, paint, anodic oxide, powder, enamel, etc.) coatings up to 0.3 mm thick on...
-
K5-C
The K5-C coating thickness gauge is a high-precision device designed for accurate coating thickness measurement on steel and non-ferrous metals. This coating thickness meter is widely used in industrial inspection....