Dual element probe 10E6
Description
Purpose
Thickness measurement of pipes and curved areas of containers with a small radius, with the ability to measure through and ignore coatings.
Particulars
Good acoustic contact on rough and very rusted surface.
Basic technical characteristics
| Technical data | Dual element probe 10E6 | Units |
|---|---|---|
| operation frequency | 10 | MHz |
| thickness range (for steel): | from 0.8 to 50.0 (without coating) | mm |
| from 0.6 to 10.0 (with coating) | mm | |
| coating thickness | up to 1 | mm |
| dimensions of contact surface | Ø8 | mm |
| element dimensions | Ø6/2 | mm |
| overall dimensions | Ø25 x 47 | mm |
| operating temperature range | from -10 to +50 | °C |
Related products
-
Dual element probe 10A6
Purpose Measurement of thickness of pipes, curved areas of containers with small radius. Particulars Utilization of new synthetic materials provides low wear and good interfacing with rough surfaces.
-
P111-S2C
Purpose Residual wall thickness measurement of metallic and non-metallic products for use with the gauge in Echo-Echo mode to read through and ignore coatings. Particulars Good acoustic contact on rough...
-
Dual element high-temperature probe 5T12
Straight dual-element high-temperature probe 5T12 is designed for the residual wall thickness measurement of pipes, boilers, and other products with surface temperatures up to 350 °C. Probe is used with...
-
Pencil Probe
The Pencil Probe for RSWA F2 enables testing even in hard-to-reach places. With its housing diameter of only 16 mm and the length of 100 mm it is designed in...