+420 267 313 996           info@ndtone.com
NDT1 KRAFT s.r.o.

Ultrasonic transducers for NDT1 KRAFT thickness gauges and Starmans Electronics thickness gauges

Category: .

Product Description

Dual element probe 5A10

Purpose 
Measurement of thickness of walls of metal tanks, containers, pipes of big diameters.

Basic technical characteristics
— operation frequency, MHz, 5;
— thickness range (for steel), mm, from 1.0 to 200.0;
— through paint testing (only for flat objects), (max thickness of paint ≤0,5 mm);
— dimensions of contact surface, mm, Ø10;
— overall dimensions, mm, Ø18 x 26;
— operating temperature range: from -10° to +60 °C.

Particulars 
Utilization of new synthetic materials provides low wear and good interfacing with rough surfaces.

Dual element probe 10A6

Purpose 
Measurement of thickness of pipes, curved areas of containers with small radius.

Basic technical characteristics
— operation frequency, MHz, 10;
— thickness range (for steel), mm, from 0.6 to 20;
— dimensions of contact surface, mm, Ø6;
— overall dimensions, mm, Ø14 x 26;
— operating temperature range: from -10° to +60 °C.

Particulars 
Utilization of new synthetic materials provides low wear and good interfacing with rough surfaces.

Dual element probe 2.5A12

Purpose 
Measurement of residual wall thickness of metallic and non-metallic products during manufacture, operation and repare.

Basic technical characteristics
— operation frequency, MHz, 2.5;
— thickness range (for steel), mm, from 3.0 to 200.0;
— dimensions of contact surface, mm, Ø15;
— overall dimensions, mm, Ø22 x 45;
— operating temperature range: from -10° to +60 °C.

Particulars 
Good acoustic contact on rough and very rusted surface.

Small-sized dual element probe 10A4

Purpose 
Measurement of wall thickness of pipes, thin metal plates.

Basic technical characteristics
— operation frequency, MHz, 10;
— thickness range (for steel), mm, from 0.5 to 10;
— dimensions of contact surface, mm, Ø4.5;
— overall dimensions, mm, Ø9 x 11;
— operating temperature range: from -10° to +60 °C.

Particulars 
High locality, possibility of testing in hard-to-access locations (longerons, pipes with small diameter, etc).