10 May 2018Representative in China
Company Beijing Zhongyan Instruments Ltd. is our representative in China. Name: Beijing Zhongyan Instruments ltd Address: Room 506, Building #1 Tower […]
01 Feb 2018ECNDT 2018, GOTHENBURG, SWEDEN
We will take part in the 12th European Conference on Non-destructive Testing that is to be held 11 – 15 June […]
01 Aug 2017NDT 2017, TELFORD, UNITED KINGDOM
We will attend the 55th annual conference on non-destructive testing, which will be held 5 – 7 September 2017 in […]
10 Feb 2017EUROPEAN COATINGS SHOW 2017, Nuremburg, Germany
We will present our products at European Coatings Show 2017, which will take place from 19 to 21 March 2017 at […]
07 Nov 2016Representative in France
We have new representative in France – company Action-NDT, Saint-Étienne-de-Tulmont, France.
26 Aug 2016NDT 2016, NOTTINGHAM, UNITED KINGDOM
We will attend the 55th annual conference of non-destructive testing, which will be held at East Midlands Conference Centre and Orchard Hotel in Nottingham, UK. Our director Dr. Syasko will present the following conference paper: “Phase-sensitive eddy-current method of metallic coating thickness measurement.On question of calibration and verification of coating thickness gauges and metallic coating thickness standards.”
30 Jun 2016Leeb portable hardness tester KT-C
We produce new dynamic hardness tester KT-C according to Leeb hardness measurement method. The device meets requirements of ISO 16859 […]
07 Jun 2016REPRESENTATIVE IN IRAN
We have new distributor in Iran – Mehrpoo Comany based in Tehran.
25 May 2016REPRESENTATIVE IN ESTONIA
We have new distributor of our coating thickness gauges – company Marde Kaubandus, Tartu, Estonia.
14 Jan 2016NEW ULTRASONIC THICKNESS GAUGE (with A-scan and through paint measurement)
We have developed and manufacture new ultrasonic thickness gauge B6-C with A-scan, B-scan and through coating measurement. The thickness measurement range […]
04 Nov 2015PAINTEXPO 2016, Karlsruhe, Germany
We invite you to visit our stand number 2462 in Hall 2 at the industrial coating technology exhibition PaintExpo 2016 that will take place 19 – 22 April, 2016 in Karlsruhe, Germany. We will demonstrate our equipment for both non-destructive and destructive testing of coatings and coating materials.
04 Nov 201512th International expert workshop – Progressive and innovative technologies for surface treatment
We will be glad if you visit our stand at the 12th International expert workshop – Progressive and innovative technologies for surface treatment that is to be held 18 – 19 November, 2016 at Myslivna hotel, Brno, Czech Republic.
02 Oct 2015ULTRASONIC TRANSDUCERS SUPPLIED TO STARMANS ELECTRONICS
A lot of dual element ultrasonic transducers for ultrasonic thickness gauges was supplied to STARMANS electronics Ltd., Prague, Czech Republic.
01 Sep 2015WCNDT 2016, Munich, Germany
We will take part in the 19th World Conference on Non-Destructive Testing that is to be held 13 – 17 […]
01 Sep 2015Representatives in China and Hong Kong
We signed distribution agreements with BEIJING HANTANG INDUSTRIAL INTERNATIONAL TRADING Co., Ltd., Beijing, China and HANTANG INDUSTRIAL (HONGKONG) Ltd., Hong Kong for exclusive dealership in China, Hong Kong and Macao.
24 Aug 2015NDT 2015, Telford, United Kingdom
We will attend the 54th Annual Conference that will take place at The International Centre, Telford, UK, 8-10 September 2015. Our Director Dr. Syasko will present а conference paper with the following title: “The modelling and optimisation of parameters of MFL transducers”.
06 Aug 2015NEW COMPANY ADDRESS!
In connection with the development of manufacture department we moved to new address:
NDT1 KRAFT Ltd.
198 00 Prague
14 Jun 2015Representative in Romania
We have new distributor in Romania – company TEST TRADING Srl., Bucharest, Romania.
14 Jun 2015NDT International Symposium, Mamaia – Constanta, Romania
We attended the NDT International Symposium that took place 10-12 June 2015 in Constanta, Romania. We read paper on NDT methods and instruments and presented our devices at the exhibition.
12 Mar 2015European Coatings SHOW 2015, Nuremberg, Germany.
We will be glad to meet you at our stand number 5-341 in Hall 5 at the exhibition European Coatings SHOW 2015 that will take place 21-23 April 2015 in Nuremberg, Germany. We will present our devices and instruments for coatings inspection.
27 Aug 2014A lot of standard and miniature ultrasonic transducers shipped to Tallinn, Estonia.
The lot of angle beam, dual and miniature angle beam transdcuers made on demand were shipped to our representative in Estonia, Lithuania and Latvia, company Telikol OU.
20 Aug 2014NDT2014, Manchester, UK.
We will demonstrate our new developments at exhibition NDT2014 held 9-11 September, 2014, Palace Hotel, Manchester, UK. Our colleagues will also present paper with the title: “Development of eddy current tangential transducers for inspection of threads of pump compressor and drill pipes.” at the conference organised by The British Institute of Non-Destructive Testing. Read the paper here.
20 Aug 2014MSV2014, Brno, Czech Republic.
We will be glad to meet you at the annual international engineering fair MSV2014 that will take place from September 29 to October 3, 2014, in Brno, Czech Republic. We will present our new devices that complete our range of products.
20 Aug 2014ECNDT2014, Prague, Czech Republic.
We invite you to visit our stand number 6 at the 11th European conference and exhibition ECNDT 2014 that is […]
24 Jul 2014A lot of Holiday Detectors shipped to Algiers, Algeria.
A lot of 10 pieces of Holiday Detectors K2.1 and several coating thickness gagues and hardness testers were shipped to STI, Algiers, Algeria, a company that among others deals with pipe line manufactures.
20 Jul 2014Two lots of ultrasonic transducers shipped to United Kingdom.
We shipped two lots of ultrasonic transducers to Katronic Technologies Ltd., UK in summer.
16 May 2014New Product Catalogue
We issued New Catalogue of our products. Please see or download the catalogue here.
16 May 2014A lot of coating thickness gauges shipped to Sofia, Bulgaria.
A lot of coating thickness gauges were shipped to our distributor in Sofia, Bulgary, Bioevibul Ltd. A customer of Bioevibul Ltd. uses our coating thickness gauge K5G with F1 probe (magneto-inductive method) and PH3-1.8 probe (phase eddy-current measurement method) for non-destructive thickness measurement of zinc coating under paint and separate paint layer thickness measurement on thin steel sheets.
15 May 2014Article in TriboTechnology journal
Our article in Czech language “Electromagnetic measurements of all types of coatings on metallic products” will be published in new edition (3/2014) of TriboTechnology, journal of friction, wear and lubrication.
13 May 2014MSV 2014 Nitra, Slovakia
We will present the most of our standard products at annual International Engineering Fair in Nitra, Slovakia, that is to be held 20-23 May, 2014. Please visit our stand no. 9a in Hall F.
04 Apr 2014Thickness measurement of zinc coating on steel under paint
A customer of Gamin Ltd. uses our coating thickness gauge K5G with F type probe (magneto-inductive method) and PH type (phase eddy-current measurement method) for non-destructive thickness measurement of zinc coating under paint and thickness measurement of just paint that provide two-layer protective system of steel sheets.
06 Mar 2014New multifunctional coating thickness gauge of all types of coating with colour display – K6C
Our coating thickness gauges are extended by new device K6C designed for thickness measurement of all types of coatings, paints and linings in the range of thickness control from 0,5 µm to 120 mm. The device has colour display, user friendly interface and a wide variety of application possibilities in dependency on connected transducer, including for example control of climatic conditions. Usual gauge-transducer system calibration methods are except additive one-point and two-point calibrations completed by new method of one-point calibration with automatic multiplicative correction. More information about the device learn here or we will be happy to assist, see Contacts.
11 Feb 2014New device for quality control of spot welds – RSWA
We have new device for inspection and NDE of resistance spot welds that applies the unique 52-channels ultrasonic matrix transducer gaining information about the internal structure and surface of inspected product in places of spot welds. Information about the spot weld and its images are displayed on colour resistive touch screen of the device with simple and intuitive interface. Learn more details here.
21 Nov 2013New representative in Singapore
We have a new representative in Singapore, company NDTec Supplies Pte Ltd.
27 Oct 2013Defektoskopie / NDE for safety 2013
We will be glad to meet you at the 43rd International Conference and NDT Exhibition NDE for Safety 2013 / Defektoskopie 2013 that will take place at NH Olomouc Congress hotel, 5-7 November 2013. We will read a paper at the conference and you can visit our stand at the exhibition.
07 Oct 2013Coating Thickness Gauges shipped to Japan
We shipped a lot of coating thickness devices to our distributor in Japan, company FTS Ltd.
03 Oct 201355th International Engineering Fair, Brno, Czech Republic
We will take part in The 55th International Engineering Fair that is to be held 7-11 October, 2013, in Brno, Czech Republic. Please meet us and learn more about our products in Hall C at stand no. 33.
05 Sep 2013Materials Testing 2013 and NDT 2013, Telford,UK.
We will be happy to meet you at non-destructive testing equipment exhibition Materials Testing 2013 and 52nd annual conference NDT 2013, both to be held from 10 to 12 September 2013 in Telford, United Kingdom. You are welcome to visit our stand no. P31 at the exhibition and listen to our paper at the conference.
Find the article “On the one-point calibration of eddy current phase transducer on example of zinc coating thickness gauges” here.
03 Aug 2013Lots of standard and chord type ultrasonic probes were shipped to Singapore, Vietnam, United Kingdom and Estonia.
Lots of standard and chord type ultrasonic probes were shipped to Singapore, Vietnam, United Kingdom and Estonia.
15 May 2013MSV 2013 Nitra, Slovakia.
We will be glad to meet you on our stand no. 34a in hall F at the annual International Engineering Fair, which will be held 21-24 May, 2013 in Nitra, Slovakia. The entire range of our products will be presented.
18 Feb 2013You make us and our devices better. Thank you.
We take seriously customers demands, remarks and new ideas and often your feedback help us improve our devices and customer service. Because of your challenging and unusual tasks we improve ourselves as well. Thank you for your trust and feedback.
Holiday Detectors improved by Customers – more details here.
15 Jan 2013Representative in Estonia and other Baltic states
We have new distributor of devices for ultrasonic testing and other NDT equipment – company Telikol OU, Tallinn, Estonia.
03 Dec 2012Ultrasonic thickness gauges and coating thickness devices shipped to Taiwan
Our dealer in Taiwan, AN-Bomb Instruments Co., LTD received another shipment of ultrasonic instruments and devices for coating thickness measurements.
28 Nov 2012A lot of ultrasonic equipment shipped to Estonia.
We prepared and shipped a lot of ultrasonic thickness devices, ultrasonic probes for flaw detection and test blocks to Telikol, OU, Tallinn, Estonia.
09 Nov 2012Titanium on titanium thickness measurement.
We prepared a coating thickness gauge with specialized probe for a customer of Gamin Ltd. for thickness measurement of titanium powder layer upon half spherical heads of joint prostheses from titanium alloy.
28 Oct 2012Device for metal thickness measurement under protective coating
A customer of our Bulgarian distributor Bioevibul Ltd. uses our device that measures thickness of metal products under protective coatings.
22 Oct 2012NDE FOR SAFETY 2012, Sec, Czech Republic
We will be glad to meet you at international NDT conference and exhibition in the Jezerka Congress Hotel, Sec, East Bohemia (app. 20 km SW from Chrudim) from October 30 to November 1, 2012. We will present our products on the exhibition.
14 Sep 201216th Fair CONTROL-TECH, Kielce, Poland
We will take part in The 16th Fair of Industrial Measuring Technology and Non-Destructive Testing CONTROL-TECH, Kielce, Poland. You are welcome to visit our stand F-27.
07 Sep 2012Representative in Slovakia
We have new distributor of our equipment for complex control of paints and lacquers quality and conditions during their application – company UTAS Ltd., Nitra, Slovakia.
04 Sep 2012Ultrasonic thickness gauges and coating thickness devices
Another lot of ultrasonic thickness devices and devices for coating thickness measurements was shipped to our dealer in Taiwan, AN-Bomb Instruments Co., LTD.
02 Sep 2012NDT 2012 – Non-Destructive Testing Conference, Daventry, UK
We will take part in the 51st Conference of The British Institute of Non-Destructive Testing that will take place in Daventry, Northamptonshire, UK, 11-13 September 2012. Our Director Dr. Syasko will give a conference paper.
30 Aug 201254th International Engineering Fair (MSV 2012), Brno, Czech Republic
Our company will also this year take part in The International Engineering Fair that is to be held 10-14 September, 2012, in Brno, Czech Republic. We invite you to visit our stand no. 51 in hall C. We will be happy to present you our products.
10 Jul 2012Cooperation with the Institute of Rock Structure and Mechanics of the Academy of Sciences of the Czech Republic
The measurements on a granite block were made using the low-frequency ultrasonic equipment in the Institute of Rock Structure and Mechanics of the Academy of Sciences of the Czech Republic.
11 Jun 2012A lot of ultrasonic transducers shipped to Latvia
We prepared a lot of ultrasonic transducers for Latvian organization TE SIA TÜV Nord Baltik.
31 May 2012Portable Hardness Testers Distributor
We have a distributor of hardness testers in Italy, company AFFRI di Affri Roberto.
16 Apr 2012Representative in Bulgaria
We have a new distributor of our equipment in Sofia, Bulgaria, company Bioevibul Ltd.
21 Mar 2012Representative in Japan
Our company signed a distributor agreement with FTS., LTD, Tokyo, for an exclusive dealership in Japan.
19 Mar 2012Transducers for ultrasonic flow meters
We sent another lot of transducers for ultrasonic flow meters in March to Katronic Technologies Ltd., UK.
04 Mar 2012Ultrasonic devices
Another lot of ultrasonic devices was delivered to our dealer in Taiwan – AN-Bomb Instruments Co., LTD.
14 Feb 2012MSV 2012, Nitra, Slovakia
We would be happy to meet you at annual International Engineering Fair, which will be held 22-25 May, 2012 in Nitra, Slovakia.
12 Jan 2012Cooperation with the Institute of Rock Structure and Mechanics of the Academy of Sciences of the Czech Republic
Our company prepared equipment for ultrasonic testing of rock structure for the Institute of Rock Structure and Mechanics of the Academy of Sciences of the Czech Republic. Also according to the technical requirements we manufactured specialized low-frequency ultrasonic transducers.
23 Dec 201145th National meeting of galvanizers
Dear Ladies and Gentlemen, we will take part on 45th National meeting of galvanizers, which will take place in Gustav Mahler hotel in Jihlava, Czech Republic. We will present our company with a paper.
30 Nov 2011Distributor in Taiwan
We have a distributor in Taiwan – AN-Bomb Instruments CO., LTD.
01 Nov 2011NDE FOR SAFETY 2011
Dear Ladies and Gentlemen, we will present all our products at the exhibition DEFEKTOSKOPIE 2011/NDE for Safety 2011 that is to be held 9-11 November, 2011, in Harmony hotel, Ostrava, Czech Republic.
10 Aug 2011MSV 2011, Brno, Czech Republic
We invite you to visit our stand at 53rd International Engineering Fair, which is to be held 3-7 October, 2011, in Brno, Czech Republic.
08 Aug 2011Materials Testing 2011, Telford, UK
Our company will participate in international exhibition Materials Testing 2011 that will take place in Telford, United Kingdom, October 13-15, 2011. The director will present our company with a paper.
17 Jul 2011Transducers for ultrasonic flow meters
We manufactured specialized ultrasonic dual element transducers for Katronic Technologies Ltd., UK, a company producing ultrasonic flow meters. These probes can be used for measuring in wide temperature range.
10 May 2011Hot dip galvanizing conference 2011, Ostrava, Czech Republic
The 17th annual Hot dip galvanizing conference is to be held 14-16 June, 2001 in Ostrava. We will take part with a paper.
10 Apr 2011For Industry 2011, Prague, Czech Republic
We would like to invite you to visit our stand on 10th International Trade Fair of Engineering Technologies that is to be held 3-5 May, 2011 at Exhibition Centre Prague Letnany.
10 Apr 2011MSV 2011, Nitra, Slovakia
We would be happy to meet you at annual International Engineering Fair in Nitra, Slovakia (24-27 May, 2011).
10 Mar 2011Defektoskopia 2011, Nový Smokovec, Slovakia
We will present our products at international exhibition Defektoskopia 2011 that will be held 5-7 April in Novy Smokovec, Slovakia.
20 Feb 2011Projection and practice of the surface treatments 2011
The 37th Projection and practice of the surface treatments conference will be held 9-10 March, 2011, in Pyramida Hotel in Prague where we will take part with a commercial presentation.
04 Feb 2011Manufacture of 10 000 pieces of specialized ultrasonic probes
Our company signed a contract with IntelaMetrix Inc., USA, for design and manufacture of 10 000 pieces of specialized ultrasonic transducers this year. You can find information about IntelaMetrix production on our site here:
05 Jan 2011New version of KT
New graduation characteristics for measuring hardness of aluminium and brass have been added to KT hardness tester.
01 Dec 2010SOLVER spółka z o.o. is our representative company in Poland
We have new distributor – SOLVER spółka z o.o. Here is the website of the company – www.solver.wroc.pl
15 Nov 2010NDE for Safety/Defektoskopie 2010
Our company took part at NDE for Safety/Defektoskopie 2010 that was held 10-12.2010 in Pilsen.
We gave paper: “Dual element ultrasonic transducers with permanent characteristics in wide temperature range”. We presented all our equipment including the newest products.
14 Oct 2010The international conference and exhibition of NDT technology
10-12 November, 2010, Pilsen, Angelo Hotel We would be glad to see you at NDE for Safety/DEFEKTOSKOPIE 2010.
14 Oct 2010National nondestructive testing conference
25-28 October, 2010, Szcyrk, Poland, Orle Gniazdo Hotel. We will be glad to see you at the exhibition.
06 Oct 2010Hot Dip Galvanizing Conference 2010
We presented our devices at the conference. Find the article “Electromagnetic thickness measurement of galvanic coatings” in Czech language here:
01 Sep 2010The 52 International Engineering Fair MSV-2010 Brno, Czech Republic
13.09.2010-17.09.2010 We would be happy to meet you at our exposition, hall A2, exp.29
19 Aug 2010CHEMOSVIT
For the company CHEMOSVIT, Svit, Slovak Republic, the non-standard industrial problem – thickness measurement of a chromic coating on the copper base for shafts of different diameter has been solved. Thickness of chrome was 5-7 µm. Our engineers had successfully solved the task in view. Device test had passed in firm CHEMOSVIT successfully.
10 Aug 2010Modification of Hardness Tester KT
Unique Hardness Tester KT(combines two different physical methods in one uniform operation concept – Quasi-Static Ultrasonic Contact Impedance (UCI) and the Dynamic Rebound Hardness Testing methods) is manufactured with big display.
01 Aug 2010Membership in the Czech Society of Nondestructive Testing
Our Company became a member of the Czech Society of Nondestructive Testing The purpose of the Society is an association of professionals in the field of Nondestructive Testing andintroduction of new advanced technologies and devices.
03 May 2010The 17-th International Engineering Trade Fair
The 17-th International Engineering Trade Fair (25.05.10-28.05.10), Nitra, Slovak Republic.
Our products have been presented at the Fair and important business negotiations and meetings were conducted.
20 Apr 2010The 11-th National NDT conference and exhibition «DEFEKTOSKOPIA 2010 and QUALITY AT WELDING 2010»
The 11-th National NDT conference and exhibition «DEFEKTOSKOPIA 2010 and QUALITY AT WELDING 2010» (13.04.2010 – 15.04.2010), Novэ Smokovec, Slovakia, Hotel Бtrium. Presentation of our Company and products was successfully hosted.